VSV Aquatic U, Инструкция по установке и эксплуатации

Страница: 23 / 26

www.vsv-group.com 23
8 - VACUUM CLEANER CONNECTION AND OPERATION
WARNING! Do not connect the vacuum cleaner through the skimmer, it can damage the skimmer!
Connect the vacuum cleaner only on top of the filtration unit!
Put down in the swimming pool a hose of vacuum cleaner. Keep a
hose near the nozzle and fill with water. Take the cover from vacuum-
cleaner and insert on a pre-filter basket. Connect hose to the cover
with hole and start cleaning of swimming pool.
CAUTION!
It is forbidden to use function of counter-flow for
cleaning!
WARNING! Vacuum cleaner hose must be tightly connected to the
tip of hose to avoid air suction and getting into pump.
When membrane during pool cleaning dirty, turn off the filtering from
power supply, clean or replace the filter membrane.
After cleaning swimming pool, again turn off filtration unit, remove
the cover from the basket, replace the dirty membrane on clean. Then
turn on filtering.
9 - REPLACING THE BULB IN SPOTLIGHT
Disconnect the power supply of filtration unit. Rotate the spotlight in a clockwise direction until the latches
spotlight will not fall into the grooves on the front of the filter. Pull out the spotlight from the water, slowly pull
surplus of cable
Take a spotlight’s cup and unscrew counterclockwise decorative nut of spotlight. Remove a glass and take out
a bulb. Replace by new bulb. Then assemble the spotlight in the return sequence. Densely tighten a decorative
nut of spotlight. Insert a spotlight on the place of braces in the grooves, and then rotate in clockwise direction
to lock it in place on the front of the filter.
ATTENTION! Spotlight works only with transformer 230 / (2 х 12V, 10VA).