VSpeak VSpeak for JR PROPO, Руководство пользователя

Страница: 8 / 16

JR PROPO, Version: 1.4 www.VSpeak-modell.de
Page 8/12
To 6: "stop timed announcements" < value > "seconds"
The following values can be set for the interval time (in seconds):
5 10 15 20 25 30 40 50 60
To 7: "break alarm" < value > "seconds"
The following values can be set for the interval time (in seconds):
20 30 40 50 60
To 9/10: "alarm receiver voltage"
You can select here the digits (1 and 0.1) for the receiver voltage alarm (8).
The alarm will be triggered if the voltage <= alarm threshold.
To 13/14: "divider rotation speed"
You can adjust the divider for the RPM sensor here in order to get a correct RPM
announcement (12), you can adjust the two digits independently.
When using brushless motors the divider should be half the pole count multiplikated
with gear ratio.
To 15: "announcement altitude in . . . "
… "Meter" / "Feet" according to setting 44.
If you set the value to 5,10,20,25 or 50, you will get the current altitude if you press the
button or if you have timed announcements. Additionally you get an announcement if
the altitude changes by the set value.
To 16/17/18: "alarm altitude"
You can adjust the alarm altitude in 1000, 100 and 10 m/ft
The alarm announcement will be triggered when the altitude => alarm threshold
alarm threshold 0000 m (/ ft) -> no alarm
To 23: "vario sound volume"
The vario sound can be adjusted in 16 steps in its volume. While setting a tone is
generated, which corresponds to the "least falling".
Zu 25/26: „alarm cell voltage“
You can select here the digits (1 and 0.1) for the receiver voltage alarm (24).
The alarm will be triggered if the min single cell voltage <= alarm threshold.
To 27: "announcement speed in . . . "
… "km/h" / "mph" according to setting 46.
To 29: "announcement current consumption in mAh"
If you set the value to 100,200,500 or 1000 mAh, you will get the current consumption
if you press the button or if you have timed announcements. Additionally you will get
an announcement if the consumption changes by the set value.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2