JR PROPO, Version: 1.4
Page 11/12
6
Update
The processor on the speech module contains a SD bootloader with a version counter.
If firmware updates are available they will be sent via mail. The information in the mail files
are copied on the Micro SD card (formatted FAT or FAT16), this is inserted into the speech
module and power turned on. The boot loader will recognize the new software version, boots
(blue LED "flickers") and is now up to date.
Everytime with the first turning on the current version number is announced.
7
Accessories
V-cable and earphones are not included as these are often already present.
Suggestions for receiver / speaker / BT devices:
(in our opinion the best price-performance ratio)
2. Hama mini-speaker
3. Wireless via Bluetooth transmitter
"B-SPEECH TX2" from
The BT transmitter functions with just about every BT headsets except those devices
specified in the manual (mobile phone accessories).
Note: In order to enable the B-SPEECH TX2 in pairing mode, hold down the On
button until the red
AND
the blue LED flashes (about 7s). At this point, the
manual is a bit "thin".
Position BSpeech module and active speaker at a sufficient distance to 2.4 GHz radio antenna!
8
Technical data
Power supply
3.5 … max. 16V
Power usage
ca. 18 .. 30 mA
Dimensions
27 x 16 x 15 mm
Weight
7 g
Connections
3.5 mm stereo jack, short-circuit-proof output for earphone
UNI / JR servo plug input
