JR PROPO, Version: 1.4
Page 10/12
4
Vario sound
If the receiver is transmitting a “Vario” value, a vario sound, in the frequency proportional vario
sound for rising/falling can be generated from the speech module during the speech pause. In
order to better distinguish between rising and falling, the tone for the rising is also interrupted.
The interruption duration decreases with increasing climbing. The zero slide, neither rising nor
falling, is soundless.
When connecting the JR TLS1-ALT (altitude sensor) a "pseudo"- Variotone from the transfered
altitude value is generated.
For the vario sound a number of settings can be made in the settings (see section 3.3)::
Vario sound rising:
ON/OFF
Vario sound falling:
ON/OFF
Vario sensitivity:
0,1 …0,2 … 0,3 m/s
Vario sound volume:
1, 2, 3, ….. 15, 16, 15, 14, ……3, 2
For a long climb passages, e.g. E-gliders, F-trail, or just during "gymnastics" can the Vario-
sound be switched OFF and the ON again by double-clicking (2x short activation).
5
wav files
The wav files (audio files of the announcements) are arranged in
accordance with the adjacent picture in directories according to the
country code (e.g. DE for German) and voices: (e.g., Robbi, Rolf,
Silvia ...).
The directory "XYZ" is available in any language. The available wav
files can be replaced by "diligent" users of the Vspeak module by
own recordings, i.e. can be overwritten.
To create your own wav files there's useful information on the
website:
The self-generated wav files can be easily tested in VSpeak (see
section 3.3):
1.
Settings choose <language> and <voice>
2.
settings "wav test ON"
(the wav files are played in an infinite loop)
"Creative self-generated voices" can be mailed for review and
inclusion in the selection of voices by VSpeak at the address
mentioned in section 12.
