- Remove the cut hair using a comb and check the
evenness of the cut regularly. (Fig 3)
9. Work around your head in sections.
USING THE PERSONAL GROOMER
The personal groomer included in this grooming kit is designed for
trimming nose and ear hair and it safely and quickly trims unwanted
hair.
Inserting batteries –
1. The battery compartment cover is located at the back of the
trimmer. To remove, simply slide the compartment off the back
of the trimmer until it is completely removed from the back of
the trimmer.
2. Insert 1x AA alkaline battery, positive end fi rst into the battery
compartment. (Alkaline batteries will ensure the best performance
and longest life of your appliance). If you are not going to use
the unit for a long time, or if the battery is dead, remove the
battery from the unit. This will increase the life of your trimmer.
3. To replace the battery compartment cover, simply slide the cover
over the back of the trimmer (insert edge fi rst). Slide the cover all
the way up the trimmer, until it clicks into place.
To remove hair from the nose and ears –
1. Remove the protective cover from the trimmer and put in a
secure place.
2. Switch the product on and gently insert the trimmer into your
nostril or ear canal to remove unwanted hair.
3. Rotate trimmer in a circular motion around the opening of the
nostril, or ear canal, taking care not to come to close to the border
of the nostril or ear. For best results, gently move the trimmer in
and out of the nose as you trim ans rotate the hair.
NB –
Always remember to turn the trimmer on before you insert
into your nostril or ear canal to avoid painfully snagging hairs.
Never insert the trimmer more than 6mm into your nose or ear.
Use any deeper than this can cause injury.
Fig 3
VS7702A-IB.indd 14-15
VS7702A-IB.indd 14-15
4/2/09 4:13:54 PM
4/2/09 4:13:54 PM
