INSTRUCTIONS FOR USE
• A plastic cover has been placed over the adaptor plug to protect
it from damage. Remove the plastic cover before inserting into a
suitable power outlet.
• Always inspect the clipper and nose & ear hair trimmer before
use to ensure the cutting head is free from hair and debris and is
running smoothly.
CHARGING THE CLIPPER
(FOR CORDLESS OPERATION)
To charge the clipper, place the charging cord directly into the base
of the clipper.
1. Plug the AC power adaptor into a 100V – 240V power supply.
2. When the appliance is switched off, plug the AC power adaptor
directly into the base of the clipper.
3. The charging light will illuminate when the adaptor is correctly
inserted into the base of the clipper and connected to the mains
power supply.
4. The charging light will always stay illuminated when the product
is charging. Once the clipper is charged, unplug the adaptor from
the mains power supply and disconnect from the appliance.
5. A full charge will supply enough power for minimum 30 minutes
use.
CORDED USE – OPERATION WITH POWER CORD
1. Plug the AC power adaptor directly into the base of the clipper.
2. Plug the AC power adaptor into a 100V – 240V power supply.
Switch the power supply on, and the clipper can now be used in
corded operation.
NOTE:
If battery power is weak, wait about 2 minutes before
pushing on/off switch.
MULTI VOLTAGE
This appliance has a multi voltage feature for worldwide use. The
voltage automatically converts for ease of use from 100v - 240v.
This appliance has an automatic internal converter which will
automatically convert the voltage without the need of a switch.
A suitable plug adaptor will be required, please refer to the chart
below.
IMPORTANT: Before using the appliance for the fi rst time, charge
for a full 16 hour continuous charge. Maximum battery capacity
will only be reached after 3 charging and discharging cycles.
After 3 cycles, the clipper must still be charged for 16 hours.
Ordinarily, the clipper may be charged overnight.
In order to maintain optimum capacity of the rechargeable
batteries, every 3 months the clipper should be recharged for
16 hours.
Plug adaptor
required
Voltage and
plug adaptors
Country
Voltage
setting
British plug:
240V
Ireland, Great Britain, Singapore, South America,
Hong Kong (parts only), Africa (parts only)
240V
European plug:
240V
Asia, Europe, Middle East Noumea, Scandinavia,
South America, Hong Kong (parts only)
240V
Australian and
New Zealand
plug: 240V
Australia, New Zealand
240V
American
plugs: 120V
North America, Japan, Canada
(parts of)
120V
VS7702A-IB.indd 6-7
VS7702A-IB.indd 6-7
4/2/09 4:13:51 PM
4/2/09 4:13:51 PM
