VRmagic C-Series, Руководство пользователя

Страница: 21 / 40

4.2.2 Cameras with MPE Garry Micro-T Connector
Note
The following instructions apply to cameras equipped with a MPE Garry Micro-T
connector only. These are
• all single-sensor cameras in PRO design VRm(F)C-X.
It is assumed that you have ordered the optional “VRmC-X PRO Interface Cable”
(
Â
2.3 on page 13).
Connecting the camera:
1. Connect the supplied cable with the MPE Garry Micro-T plug to the camera’s
receptacle (
Â
2.2 on page 10).
2.
The other end of the cable splits into 0.1” receptacles for trigger and strobe and a
receptacle for an external power supply. Connect trigger and strobe, if required.
f View the cable plan for a detailed description (
Â
7.3 on page 35).
3. Connect the USB cable to the camera’s USB port.
4. Continue with  4.3 on page 22 and read the information on power supply.
1 11
12 21
...
Fig. 13: VRmC-X PRO interface cable for PRO cameras
1 MPE Garry Micro-T 387-1-021-ZS0, to be plugged into camera receptacle
2 Switchcraft PC722A receptacle for 5 V power supply
3
Receptacles for 0.1” connector (7 pieces)
21 USB Cameras – User Guide
Hardware Installation
USB Components