IN CASE OF TWO-STROKE ENGINE
In case of two-stroke engine
with hang muffler.
Silencer extension
adaptor (not include)
Secure the engine with four 3x25mm screw
In case of two-stroke
engine with side silencer.
In case of two-stroke
engine with the silencer
extension adapter.
18- Engine / Motor 2-Takt
19- Electric motor/Elektromotor
Firewall
125~127mm
(5-1/8”)
B’
B
B=B’
A
A=A’
A’
TOP-VIEW
SIDE-VIEW
FRONT-VIEW
- Using a plywood motor mounting plate as a template, mark the
fire wall where the four holes are to be drilled (1).
! Engine thrust on balk head
is already adjust at factory
5mm
13/64”
-Attach the aluminum motor mounting plate on to the motor and
secure it in place with four screws ( included with motor set) (7).
! Align the mark on the plywood motor
mount with the mark on the fuselage.
! Align the mark on the plywood motor mount
with the center lines on aluminum motor mount.
- Remove the plywood motor mounting plate and drill
a 13/64”(5mm) hole through the fire-wall at each of the
four marks marked (2).
- Using a aluminum motor mounting plate as a template, mark the
plywood motor mounting plate where the four holes are to be
drilled (3).
- Remove the aluminum motor mounting plate and drill a 1/8”(3mm)
hole through the plywood at each of the four marks marked (4).
-Push the four 5x70mm bolts through the fire-wall as shown (5).
- Reposition the plywood motor mounting plate (2pcs) and secure
it in place with eight 5mm nuts and washers (6).
Note: B=B’(Side-view) and A=A’(Top-view)
-Attach the motor on to the plywood motor mounting plate and
secure it in place with four 3x15mm (1/8x19/32”) screws(8).
3mm
1/8”
1
2
3
4
5x70mm.......4
5mm nut.......12
5mm washer...16
3mm screw/nut...4
Plywood motor
mounting plate
(2pcs)
Aluminum motor
mounting plate
5
6
7 - 8
