5- Retract servo / Einziehfahrwerk servo
CENTER
WING
SECTION
BOTTOM
Retract servo
/ Retract servo
X
Link the servo and retract gear arm with push rod. Be sure to adjust the stroke so
that the landing gear locks in both up and down position.
2” (~50mm)
1”(25mm)
19/64”
(7.5mm)
8-5/16”(~210mm)
RETRACT PUSHROD (SIDE VIEW)
With the retract and retract servo in the retracted position, mark the position where
each of the pushrod will attach to the servo arm, a small piece of masking tape
works well for this. Cut off the excess length each rod.
(TOP VIEW)
Cut away only
the covering
4- Servo mount / Servohalterung
A
FWU2
FWU1
A
CENTER
WING
SECTION
CA
CA
CA
CA
BOTTOM
Retract servo mount (plywood A,B,C)
Install the retract servo onto the retract
servo mount and secure it in place with
four screw (included with radio set).
Einbau des Servos fur
das Einziehfahrwerk
Instruction how to build in the retracting landing gear
(This Gearis OPTIONAL )
Einbauhilfe bei Anbringen eines
Einziehfahrwerks (Optional
bestellbar; nicht im Baukasten
enthalten!)
Einbau des Servos fur
das Einziehfahrwerk
6- Linkages / Ruderanlenkung
Fahrwerkanlenkgestänge
EINGEFAHREN
AUSGEFAHREN
Einziehfahrwerk servohalterung
Schneiden Sie etwas
Folie weg
FWU2
FWU1
