2.5x10mm.....4
Board or transparent plastic
Adhesive
Attach the board or transparent plastic on the side of
the fuselage with the adhesive as show.
Using a pencil or felt tipped pen trace around the engine
head where it meet the cowl. Cut the opening the board
or transparent plastic for the engine head as marked
before.
Remove the engine and insert the cowl on to the fuselage
so the distance from the fire wall to the front of the cowl is
108 - 110mm.
Remove the cowl from the fuselage and carefully cut the
opening for the engine head as marked above. Do the
same way with the hole for needle-valve.
Again. Insert the cowl on to the fuselage and secure it in
place with five 2x5mm screws.
108mm
Ruler
Adhesive
1.5mm
1~2mm
Battery hatch
Akkuklappe
Magnetic piece
Magnet
X
To muffler
Filler tube
To engine
3x35mm screw
Rubber stopper
TOP VIEW
Draufsicht
Remove the battery-stand out of the fuselage.
1
2
3
16- Fuel tank installation / Tankeinbau
17- Cowling installation / Motorhaube
