-Using a aluminum motor mounting plate as a template,
mark the plywood motor mounting plate where the four
holes are to be drilled.
-Remove the aluminum motor mounting plate and drill a
7/32”(5mm) hole through the plywood at each of the four
marks marked .
Note: The aluminum motor mounting included with electric
motor set.
Motor mounting plate
(The long of the aluminum tubes are same and depend of your motor)
Note: The aluminum tubes for the motor installation not include.
Fuselage - front view
SECTION 7 - ELECTRIC MOTOR
Step 7A
Step 7B
Li-Po battery stand
Li-Po battery stand
Step 7D: Battery stand
Step 7C: gear door servo
Secure the battery stand
using four 3x10mm screws
