Plastic control horn
....................2
2x20mm screw
...............4
2mm
Elevator push rod
Elevator push rod
Elevator control horn
Elevator control horn
Bottom-view
SECTION 14 - ELEVATOR CONTROL HORN
SECTION 15 - TAIL WHEEL
1- Slide the wire, straight end first, into the push rod tube
2- Insert the Z-bend into the hole on the tail wheel control arm.
3- Place the tail wheel control arm to the center of the tail
wheel mount.
4- Insert the tail gear assembly through the tail gear
mount.
Step 15A
Step 15B
2x8mm
1mm
