36
feature, make sure that the correct date, time and time zone have been set
up. (See
Date/Time
on page 26.) Also make sure that the DNS IP number
has been set up under the TCP/IP settings. (See
TCP/IP
on page 21.)
The following options are available in the submenu:
• Enable
– enables the NTP function to synchronize the real-time
clock.
• Period (Hour)
– sets up the time interval after which the time is
re-synchronized.
• Server
– selects the NTP server from several pre-defined choices.
• Edit NTP Server
– enables you to choose your own NTP server.
• Test&Save?
– tests the server and saves the changes.
To change NTP settings:
1. Use the
Up
and
Down
arrow buttons to select a field to change
from the NTP menu.
2. Press the
Right
button to confirm.
3. Press the
Key Pad
button on the remote control to display the on-
screen keyboard.
4. Use the
Arrow
buttons to select letters from the on-screen key-
board and use the
OK
button to confirm.
5. When the field is set correctly, press the
Key Pad
button on the
remote control to turn off the on-screen keyboard.
6. Press the
OK
button to save changes.
3.3.19 Default settings
Use the
Default Settings
option to reset all configurable parameters to their
factory default settings. When the
Default Settings
option is chosen from
the
System Setup
menu, a message is displayed asking you to confirm.
Press the
OK
button to confirm, or the
Cancel
button to cancel the opera-
tion.
R
ecord setup
