TUFFER Printer Manual
5
SI ONBOARD www.vishaypg.com
Doc #: 6190225 Rev
C
3.2
Mounting and locating Printer
The Rubber boot encasing the Printer has magnetized mounting buttons within it. The data
and power cable length is approximately six feet. This implies that the Printer needs to be
located within a radius of six feet of the Tuffer printer. Select a flat metallic surface and let
the magnets secure the printer.
Note the printer may be mounted vertically as shown below:
Vertically Mounted Printer
3.3 Interfacing the printer to Tuffer Meter
Once the Printer is securely mounted, the next step is to connect the Data + Power cable to
the Tuffer meter. Hold the metallic cable pin connector and mate to the RS232 port of the
Tuffer meter. Once connected, the Printer is ready for use.
