INSTALLING THE CAMERA
With fixed power source
1.
Choose a place at rear bumper you wish to install (usually, in the middle of
bumper).
2.
Screw the camera’s mounting bracket on the bumper. Make sure the camera’s
firmly fitted.
3.
Connect the power cable with horseshoe joints to the power source (12- 24V).
Connect the red cable to the positive pole and the black cable to the negative
pole.
Note: If you are not sure which is the positive or negative pole, please try one
way and switch the cables if it doesn’t work. Mixing up the positive and negative
poles won’t damage the camera.
4.
Start the vehicle engine to power up the camera. The power indicator will be
steady bright when the camera is powered up.
