CONFIGURING YOUR RECEIVER
Press the Power button to power ON the monitor. Press and hold to power OFF the
monitor.
Press
(MENU button) to enter/exit the Main menu.
Use the
(Left / Right / Up / Down) buttons to navigate through menu items
and change the settings.
Scan frequency
Setup the time interval for the camera channels to switch in Scan mode (3, 8 or 12
seconds)
1.
Press
(MENU button) and
to choose the SCAN function
2.
Press
to choose the scan frequency. You can configure the system to
perform scanning every 3 seconds / 8 seconds / 15 seconds.
Camera setting (CAM 1 – 4)
Turn ON/OFF the specified camera or set to Mirror to mirror the camera image. If the
camera is set OFF, the camera image won’t show on the monitor even it is supplied with
power.
1.
Press
(MENU button) and
to choose CAM 1.
2.
Press
to turn ON/OFF CAMERA 1 or MIRROR the camera image.
3.
Repeat step 1 to 2 for camera 2 ~ 4.
Note: when you install the camera(s) toward the opposite direction to which you’re
viewing, such as the rear camera, please configure the camera to MIRROR to
acquire the normal screen image.
