Remarks:
Please keep the NFC area of mobile device and earphones within 1
centimeter until the red and blue LED of earphones flash alternately (It
may take 3 seconds to make the first pairing).
The earphones will disconnect when the NFC area of mobile device and
earphones touch each other again.
3)
Pairing earphones with multi devices via Bluetooth
The earphones can connect with two Bluetooth mobile devices at the same
time.
The general pairing procedures are as follows:
1)
Pairing the earphones with device one
2)
Turn on the earphones to enter into pairing mode again, and pairing them
with device two
3)
Operate device one to connect with earphones. The earphones have
already connected with two devices in this moment
Remarks:
The multi-pair function is off in factory set, please turn on this function as
following:
Turn on: long press
and
button under standby mode, and release
it until you hear four rising tones
Turn off: long press
and
button under standby mode, and release
it until you hear four fall tones
To improve the stabilization of earphones, we suggest you turn off the
multi-pair function when you only connect with one mobile device.
4. Making a call with the earphones
1)
Basic operation
Functions
Status of
earphones
Operation
Prompt tone
Cancel a call
Calling
Short press
once
One
short
tone
Answer a call
Incoming
call
ringing
Short press
once
Two
rising
tones
6
