6. LED indicator
LED indicator
Status of earphones
Red and blue LED flashes
alternately
Pairing mode
Blue LED flashes once every 2
seconds
Not connected to device
Blue LED flashes twice every 4
seconds
Connected to device
Red LED flashes instead of blue
LED
Low battery
7. Factory Reset
When you are charging the battery, long press
button about 4 seconds
and release it until the red and blue LED flashes simultaneously, you will
hear 4 prompt tone. Your earphones’ settings are reset to factory defaults.
Remarks:
During the factory reset, the paired list of earphones is deleted. After turning
on again, the earphones will enter pairing mode automatically, and you need
to re-pair and connect with Bluetooth devices.
Care and maintenance
Read the following recommendations carefully before using VXE780.
Following these you will be able to enjoy this product for many years.
Keep it dry and don’t put it in the dump place to avoid the product’s
internal circuit being affected.
After using this product during strenuous exercise, wipe it dry.
Keep the product away from direct sunlight or hot places. High
temperatures will shorten the life of electronic devices, destroy the
battery or distort certain plastic parts.
Don’t expose the product to extremely cold areas. It may damage the
internal circuit board.
Don’t try to disassemble the product as it may get damaged if you are not
professional.
Don’t let it fall down onto the floor or other hard surfaces. The internal
circuit might get damaged.
Don’t use intensive chemical products or detergent to clean the product.
10
