Vox Tonelab EX, Руководство пользователя

Страница: 9 / 44

5
b. TUNER LED
These lights are used for tuning (p. 29, “Tuner”).
When you’re using the tuner, the LEDs will indicate the tun ‐
ing status.
c. Stereo speakers
You can listen to the sound output from the built ‐ in stereo
speakers. To adjust the volume level, use the SPEAKER
LEVEL control on the rear panel (p. 8).
NOTE:
The speakers will be muted when a cable is connected
to the OUTPUT/PHONES jack.
NOTE:
Some programs (especially those with an emphasized
low range) may cause the sound from the speakers to
be distorted or noisy. In such a case, adjust the volume
level using the SPEAKER LEVEL control.
4. Pedal 1 section
b a
Here you can adjust the settings for the
pedal 1 effects.
For details on each effect, refer to “Pedal
1” (p. 23)
a. PEDAL 1 ON/OFF switch and LED
This turns the pedal 1 effect on/off.
The LED will be lit if the pedal 1 effect is on.
b. PEDAL 1 knob
Rotating this knob enables you to select the pedal 1 effect
type and adjusts the effect parameters assigned to each effect.
If the pedal 1 effect is turned off, rotating this selector will
turn the pedal 1 effect on.
5. Pedal 2 section
Here you can adjust the settings for the pedal 2 effects.
For details on each effect, refer to “Pedal 2” (p. 24).
a. PEDAL 2 ON/OFF switch
and LED
b a c
This turns the pedal 2 effect
on/off. The LED will be lit if
the pedal 2 effect is on.
b. PEDAL 2 selector
This selects the pedal 2 type.
If the pedal 2 effect is turned
off, turning this selector will
turn the pedal 2 effect on.
c. EDIT knob
This adjusts the parameters of each effect.
6. Modulation section
b a c d
Here you can adjust the set ‐
tings for the modulation effect.
For details on each effect, refer
to “Modulation” (p. 25).
a. MODULATION ON/OFF switch
and LED
This switch turns the modula ‐
tion effect on/off.
The LED will be lit if the effect is on.