Vox Tonelab EX, Руководство пользователя

Страница: 7 / 44

3
b. STAND ALONE PEDALS switch and LED
Use this to turn the stand alone pedal on/off.
The LED will be lit ‐ up if the stand alone pedal is on.
c. CABINET ON/OFF switch and LED
This turns the cabinet model on/off. The LED will be lit if the
cabinet model is on.
By entering the OPTION parameter setting mode you can set
parameters for the cabinet model.
The OPTION parameter setting mode
To enter the OPTION parameter setting mode, hold down the
CABINET ON/OFF switch for about one second. You’ll be in
The OPTION parameter setting mode, and the LED will
blink.
The
OPTION parameter setting mode lets you adjust the fol ‐
lowing settings.
• GAIN control: cabinet model (CABINET SELECT)
• TREBLE control: presence (PRESENCE)
• MIDDLE control: noise reduction (NR)
• BASS control: Total Equalizer High (EQ HI)
• REVERB control: Total Equalizer Low (EQ LO)
• VOLUME control: Trim (TRIM)
To return to the previous operation, press the CABINET ON/
OFF switch or the EXIT/TUNE switch.
NOTE:
Total Equalizer is enabled only when the AMP/LINE
switch is set to LINE.
NOTE:
Presence is effective only when the amp model or the
stand alone pedal is turned on.
d. AMPS/STAND ALONE PEDALS selector
This selects the amp model or the stand alone pedal.
The type you select will determine the response of the gain
circuit and tone controls, and the order in which they are
located in the circuit.
If the amp model and stand alone pedals are turned off, rotating
this selector will turn the amp model or stand alone pedal on.
e. GAIN control
This adjusts the gain of the selected amp model or stand
alone pedal.
In the OPTION parameter setting mode, this control selects
the cabinet model. If the cabinet model is turned off, turning
this control in the OPTION parameter setting mode will turn
the cabinet model on.
f. TREBLE, MIDDLE, BASS controls
These adjust the tone of the high, mid, and low frequency
ranges. The way these controls affect the tone will depend on
the model you’ve selected.
NOTE:
Depending on the selected amp model, there may be
almost no sound if you turn all three of these controls
to the far left.
In the OPTION parameter setting mode, the TREBLE control
adjusts the presence, the MIDDLE control adjusts the noise
reduction, and the BASS control enables you to adjust the
Total Equalizer High.
g. REVERB knob
Depending on the position of the knob, this selects the reverb
type (SPRING, ROOM, or HALL), and adjusts the amount of