Vox Tonelab EX, Руководство пользователя

Страница: 10 / 44

6
b. MODULATION selector
This selects the modulation type.
If the modulation effect is off, rotating this selector will turn
the modulation effect on.
c. EDIT knob
This adjusts the parameters of each effect.
You can use this knob to adjust two different parameters, EDIT 1
or EDIT 2. The specific parameters that are adjusted will depend
on the selected effect. For details, refer to “Modulation” (p. 25).
• EDIT 1: turn the EDIT knob
• EDIT 2: hold down the TAP switch and turn the EDIT knob
d. TAP switch and LED
This is used to set the speed of the modulation effect. The
interval used to press the TAP switch twice will be assigned
as the effects modulation speed.
The LED will blink to indicate the specified speed.
HINT:
To set a precise speed that matches the tempo of a song,
press the TAP switch several times in rhythm with the song.
• If you’ve selected PITCH, the pitch setting will change each
time you press the TAP switch.
• If you’ve selected FILTRON, the envelope up/down setting
will change each time you press the TAP switch. The LED
will light ‐ up if Up is selected.
• f you ʹ ve selected TALK MOD, the vocal character type (1 or
2) setting will change each time you press the TAP switch.
If type 2 is selected, the LED will light up.
You can edit parameters such as SPEED or PITCH by holding
down the TAP switch and turning the EDIT knob (EDIT 2).
For details, refer to “Modulation” (p. 25).
7. Delay section
b a c
Here you can adjust the settings for the
delay effect.
For details on each effect, refer to “Delay
types” (p. 28)
a. DELAY ON/OFF switch and LED
This switch turns the delay effect on/off.
The LED will be lit if the effect is on.
b. DELAY knob
Rotating this knob enables you to select the delay type or
adjust the delay level.
If the delay effect is turned off, rotating this selector will turn
the delay effect on.
To adjust the feedback amount, rotate the DELAY knob while
holding down the TAP switch.
c. TAP switch and LED
This is used to set the delay time of the delay effect. The inter ‐
val used to press the TAP switch twice will be assigned as the
delay time.
The LED will blink to indicate the specified time.
NOTE:
You can set the delay time using the program 1–4 ped ‐
als. In this case, the interval at which you tap twice on
a program pedal (that corresponds to the selected pro ‐
gram) will be assigned as the delay time.
HINT:
To set a precise time that matches the tempo of a song,
press the TAP switch several times in rhythm with the
song.