Vox DA10, Руководство пользователя

Страница: 7 / 20

7
GAIN
This adjusts the preamp gain.
TONE
This adjusts the tone.
MASTER
This adjusts the overall volume of the amplifier.
NOTE: The GAIN control also affects the amount of distortion.
For some settings, there may be virtually no distortion.
3. Effect section
Here you can adjust settings for the effects and noise
reduction. For details on each effect, refer to “Styles
and effects” (page 12).
EFFECTS
Selects the type of effect. You can use the TAP but-
ton, EDIT 1 knob and Bypass button to adjust the pa-
rameters of each effect. When you select an effect
type, the effect parameters will be initialized and
Effect Bypass will be defeated.
EDIT 1
Use this to adjust the parameters of each effect. By
using this knob in conjunction with the TAP and BY-
PASS buttons as described below, you can adjust
three different parameters. (That is, if the BYPASS
LED is dark.)
Turn EDIT 1 (without pressing a button) (EDIT 1)
Turn EDIT 1 while pressing TAP (EDIT 2)
The Guitarist’s Guided Panel Tour
In this chapter we’re going to take a look at the top and rear
panels of your amp.
A. Top Panel
1 2 3 4
1. INPUT Section
This is where you plug in your guitar.
2. AMP Section
Here’s where you adjust the settings for your ampli-
fier.
STYLE selector switch
This switch selects one of the eleven different sound
Styles including clean sounds, slightly-distorted
bluesy sounds, crunchy rhythm sounds, and high-
gain lead sounds. When you select a different type of
sound, the noise reduction setting is automatically
configured to accommodate the selected amp sound
Style.