Vox DA10, Руководство пользователя

Страница: 9 / 20

9
B. Rear Panel
1.5W 0.5W MAX
POWER
SELECT
LINE/PHONE AUX IN INPUT VOLUME
MIC
BUILT BY VOX MANUFACTURING
VIETNAM UNDER THE DIRECTION
OF VOX R&D ENGLAND.
Vox Amplification Ltd.
CAUTION:
DISCONNECT SUPP LY CORD BEFORE CHANGING FUSE .
FOR CONTINU ED PROTECTION AGAINST RISK OF FIRE,
REPLACE ONLY WITH SAM E TYPE AND RATING OF FUSE .
ATTENTION:
DEBRANCHER AVANT DE REMPLACER LE FUSIBLE .
UTILISER UN FUSIBLE DE RECHAN GE DE MEM E TYPE.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK
DO NOT EXPOSE THIS PRODUCT TO RAIN OR M OISTURE .
3021177
CONFORMS TO
UL STD 60065
CERTIFIED TO
CAN/CSA STD
C22.2 No. 60065
USE ONL
Y
WITH FUSE
1 2 3 4 5 6
4. AUX IN jack
Connect an external audio device to this jack. This
enables you to conveniently connect a CD or MP3
player and play your guitar along with the player’s
output.
NOTE: Adjust the playback volume on the connected player.
5. MIC INPUT jack
Connect a microphone to this jack.
6. MIC VOLUME knob
This adjusts the volume of the microphone input.
1. Power input
Connect the included power cord here.
2. POWER SELECT
This switch adjusts the output wattage of the power
amp. This means that even when the master volume
is turned up to max to drive the power amp, you can
adjust the volume without losing any tone or feel.
3. LINE/PHONE jack
Use this jack if you’re plugging directly in to a mixer,
recording device, or if you’re using headphones.The
output signal from this jack is taken before the power
amp, and the character of the guitar amp cabinet is
applied to it.
NOTE: Connecting headphones to this jack will mute the inter-
nal speaker.