manualshive.com logo in svg

Vox Technologies Peak 6220, Руководство пользователя, Страница: 67 / 82

Поделиться
Скачать
Vox Technologies Peak 6220 Скачать руководство пользователя страница 67

PEAK 6220 User‘s Guide 

BIOS Setup                                                                                                                4-

43

 

RAM PARITY ERROR - CHECKING FOR SEGMENT ... 

 
Indicates a parity error in Random Access Memory. 

 

Should Be Empty But EISA Board Found 
PLEASE RUN EISA CONFIGURATION UTILITY 

 
A valid board ID was found in a slot that was configurated as having no board ID. 
 

NOTE;  When this error appears, the system will boot in ISA mode, which allows 
you to run the EISA Configuration Utility.

 

 

Should Have EISA Board But Not Found 
PLEASE RUN EISA CONFIGURATION UTILITY 

 
The board installed is not responding to the ID request, or no board ID has been 
found in the indicated slot. 
 

NOTE:   When this error appears, the system will boot in ISA mode, which allows 
you to run the EISA Configuration Utility. 

 

Slot Not Empty 

 
Indicates that a slot designated as empty by the EISA Configuration Utility actually 
contains a board. 
 

NOTE:  When this error appears, the system will boot in ISA mode, which allows 
you to run the EISA Configuration Utility. 

 

SYSTEM HALTED, (CTRL-ALT-DEL) TO REBOOT ... 

 
Indicates the present boot attempt has been aborted and the system must be 
rebooted.  Press and hold down the CTRL and ALT keys and press DEL. 

 

Wrong Board In Slot 
PLEASE RUN EISA CONFIGURATION UTILITY 

 
The board ID does not match the ID stored in the EISA non-volatile memory. 
 
NOTE:  When this error appears, the system will boot in 
ISA mode, which allows 
 you to run the EISA Configuration Utility. 

Содержание Peak 6220



















































































Отзывы:

Нет отзывов