Vortice VORT QUADRO dMEV, Инструкция пользователя

Страница: 32 / 48

32
QE-CFR
Infill frame (fig. 18÷19)
Hides imperfections due to an incorrectly finished installation on a plaster or on tiles or in openings on recesses
that are too large that the QE would not be able to cover completely. The frame is mounted between the wall and
the front part of the QE.
ENGLISH
QE-MH
Kit for recessed installation of plasterboard structures
(fig. 1÷5)
Required:
1 mounting support (fig.2, A)
2 hex head screws (fig.1, A))
2 hexagonal nuts (fig.2, B)
Fixing to the plasterboard structure is carried out by means of a kit with wall supports (pos.A fig. 4).
The bracket can be shortened near the notch. (fig.2, C)
CEILING KIT QUADRO EVO
Kit for false ceiling installation.
Refer to the specific manual of the accessory.
QE-UMB
Universal bracket for recessed installation (fig. 6÷11)
Additional adjustment
Align the installation position to the current situation, loosening the side screws in the bracket slots in height and
depth. Firmly tighten the screws.
Required:
1 wall bracket (fig.9, A)
2 side bars (fig.8, A)
1 mounting bracket (fig.7, A)
2 Mx16 hex head screws (fig.6, A)
2 M6 hexagonal nuts (fig.7 B)
4 M6x10 self-tapping screws (fig.8, B; fig.9, B)
The bracket can be shortened near the notch (fig.7, C)
Wall mounting: fig.10. (A: Align perpendicularly)
Measurements can be modified: space between the wall and the rear side of the box: fig. 11 (A: long, B: short,
C: short rotatable)
QE-SPF
Aesthetic wall spacer frame (fig. 12÷17)