24
ENGLISH
Table 1
Component
Qtà
1
HRI Mini EP Heat Recovery Unit
1
2
Fixing Bracket & Screws
2
3
6mm x 19mm/21.5mm Condense Adapter
1
4
Straight Hose Connector
1
5
Installation, Servicing & Maintenance Instructions
1
GENERAL DESCRIPTION
The HRI MINI EP System provides mechanical ventilation to the living/bedroom. The unit is designed to provide
continuous low level extraction from the wet rooms via a system of fixed ductwork and grilles. Heat is recovered from the
stale contaminated air drawn from the wet room and uses a high performance heat exchanger recovering the heat and
transferring it to temper the incoming fresh air into the living/bedroom. The ventilation rate can be set into several ways.
For example it will increase when the wet room is being used for periods of time, in excess of 2 minutes and the unit
switches to boost mode. The extracted air is then discharged to outside via a single duct and grille.
The case is constructed in aluminium/zinc coated steel. Internal faces of the casing are acoustically lined with flame
retardant acoustic foam.
NOTE:
For additional ancillary equipment (e.g. ducting. grilles etc.) contact the Sales Department.
Figure 2. HRI MINI EP with a cut out section showing the fans & PCB.
FIGURE 2. EXPLODED FEATURES
Suspended Unit Only
12
Condensate Tray
13
Magnetic Filter Cover
14
Filters
15
Front Cover Assembly
16
Access Cover to Controls
17
Front Cover Screws
CARTON CONTENT
COMPONENT CHECK LIST
12
14
17
13
13
16
15
2a
Содержание HRI MINI EP
