Vortex-RC VT-AllRounder, Инструкция пользователя

Страница: 19 / 35

Instructions for building the Wing
The Trainer, Intermediate and the Expert wings are built similarly. Except the following
differences :
-Intermediate and Expert wing requires cutting,beveling and hinging of Ailerons
- Intermediate wing requires installing the servo in the center, after the wing build is
completed.
- Expert wing requires installing 2 servos and the necessary Control Linkages
- Expert Wing does NOT come with Dihedral braces. Also the Spar needs to be joined
differently as shown later.
The build process below is for all the three wing types. Most of the steps are common, but
pay attention to measurements, and specially the wing joining steps.
We shall illustrate the steps for building the Right wing. Follow Step 5 for Left wing also.
Step 5. Laminate the Wing panels. 1 hour
Note : In order to build the wings straight and true. Please follow the
instructions below carefully. The airfoils are high performance and in order to
use them effectively, you need to ensure the wing is not warped or twisted. It
is very easy to warp the wings if the instructions below are not followed.
www.Vortex-RC.com ​ 19