voptech GoIP Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 71

background image

17

The top table shows a number of GSM parameters which are useful to determine if the GSM channels in the
gateway are working properly.

1.

Remote SIM - This tells if Remote SIM function is used or not. "DISABLE" means using the local SIM
cards that are inserted to the device.

2.

SIM - "Y" means the corresponding GSM module is able to access the designated SIM card properly.

3.

GSM - "Y" means the corresponding GSM module registers to the GSM network successfully.

4.

RSSI - Received Signal Strength Indicator. Its normal range is from 0 to 31 which represents a signal
level ranging from -113 dBm to -51 dBm; each increment in rssi values means 2 dBm increment. 99

means that the signal level is unknown or undetected.

5.

GPRS Login - "Y" means access to a GPRS network.

This status is obtained from the command

AT+CREG.

6.

GPRS Attach - "Y" means GPRS Attach is successful and is ready for PDP. This status is obtained from
the command AT+CGATT.

7.

Carrier - This shows the name of the current GSM carrier.

8.

GSM BSC mode - This shows the current setting for the GSM BSC mode which determines how the
device selects a base station. For more information, please refers to the section 3.3.15.

9.

Cell ID - This shows the Base Transceiver Station (BTS) ID.

10. LAC - This shows the Location Area Code.

The bottom table shows more detailed information on the onboard GSM modules and the SIM card inserted.
1.

Module - The model number of the GSM module.

2.

Firmware Ver - The version number of the firmware installed in the module.

3.

SIM Number - The GSM number that is assigned to the SIM card.

User must enter this number

manually.

4.

IMEI - International Mobile Station Equipment Identity

5.

IMSI - International Mobile Subscriber Identity

6.

ICCID - Integrated Circuit Card Identifier

5.2.4 SIM Call Forward

The table below lists the current call forward settings of the SIM card assigned to the corresponding channel.
There are 3 possible status:
1.

ON - This means that the corresponding Call Forward mode is enabled and this setting is sent to the

GSM network when a new GSM registration takes place.

2.

OFF - This means that the corresponding Call Forward mode is disabled and this setting is sent to the

«
...
15
16
17
18
19
...
»

Содержание GoIP








































































Отзывы:

Нет отзывов

Похожие инструкции для GoIP

Бренд: RTA Страницы: 73

MESSAGING SECURITY GATEWAY -

Бренд: F-SECURE Страницы: 19

Бренд: NetComm Страницы: 20

Бренд: Planet Страницы: 57

Бренд: Matrix Telecom Страницы: 32

Бренд: Samsara Страницы: 15

Бренд: Thompson Страницы: 89

Бренд: PEHA Страницы: 4

Бренд: Sagem Страницы: 27

Бренд: Aaeon Страницы: 71

Бренд: RTA Страницы: 71

SET CLVSG 850-1

Бренд: SSS Siedle Страницы: 32

Бренд: ICC Страницы: 58

Бренд: ICC Страницы: 70

Бренд: NEP Страницы: 6

Бренд: Genexis Страницы: 27

Бренд: ViewSonic Страницы: 65

Бренд: Juniper Страницы: 26

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды