DEPTH ADJUSTMENT
To achieve the required depth of cut, loosen the
Depth Adjustment Screw
(12)
and slide the to the
desired depth using the Depth Adjustment Scale
(13)
as a guide.
Once the desired depth has been set, re-tighten the
Depth Adjustment Screw and make sure it is secure.
POWERING ON/OFF
IMPORTANT:
Before using the Circular Saw, first
ensure all screws and bolts are tightened and that you
have made all the correct adjustments.
To power on the Saw, press the Safety Switch
(5)
,
then simultaneously squeeze the Power Trigger
(6).
NOTE:
When the Power Trigger is released, the Saw
will stop immediately due to a brake mechanism.
This prevents the Saw Blade from spinning after you
have released the Trigger. To power the tool back on,
you will need to follow above steps again.
WARNING!
Always make sure that the Battery is removed from the Circular Saw before making adjustments or
performing maintenance to the tool.
1. Press
2. Squeeze
WARNING!
Always make sure that the Battery is removed from the Circular Saw before making adjustments or
performing maintenance to the tool.
Loosen
Adjust the Depth
Tighten
