background image

BATTERY CAPACITY INDICATOR

When in use you can check the status of the 20V Max Battery 

(18)

 by pressing the Battery Level 

Indication Button 

(21)

.  Pressing this will illuminate the 20V Max Battery’s level of charge.

0-10% Charged

10-25% Charged

25-50% Charged

50-75% Charged

100% Charged

 

CHARGING LIGHTS

Connect the Battery Charger 

(16)

 to the power outlet socket.

• 

Frequently monitor the Battery Charger and 20V Max Battery while connected.

• 

Unplug the Battery Charger 

(16)

 and disconnect it from the 20V Max Battery 

(18)

 when 

finished.

• 

Allow the 20V Max Battery 

(18)

 to cool completely before using it.

• 

Store the Battery Charger 

(16)

 and 20V Max Battery 

(18)

 indoors, and out of reach of children.

IMPORTANT

 if the battery does not fit properly, disconnect it and confirm that the battery 

pack is the correct model for this charger as shown on the specification chart. Do not charge 

any other battery pack or any battery pack that does not securely fit the charger.

GREEN LIGHT

RED LIGHT

BATTERY ON THE 

CHARGER

CHARGING STATUS

ON

OFF

NO

Charger connected to power 
supply.

OFF

FLASHING

YES

Battery being charged.

ON

OFF

YES

Battery fully charged.

ON

ON

YES

Battery defective of faulty 
connection. 
Contact DOMU customer 
services.

ON

ON

YES

Battery too hot or too cold to 
be charged. Battery will begin 
to charge once the Battery has 
cooled sufficiency. 

Содержание 3500008



















Отзывы: