CHARGING
Charge the appliance fully before first use
Insert the Charger
(2)
into the Charger Input.
Ensure it is positioned correctly for charging.
The Indicator Light
(9)
located on top of the Vacuum
will flash red while charging.
Once the Vacuum is fully charged the light will
illuminate a solid green.
Charge the Vacuum for up to 4 hours.
NOTE:
It is normal for the Charger
(2)
to become
warm to the touch during charging periods.
DO NOT:
unplug the Charger
(2)
by pulling on the
power cord.
Always unplug the Charger
(2)
in the event of
prolonged absence (holidays,etc.). Recharge the
appliance again before use as batteries may self
discharge over increased periods of storage.
IMPORTANT!
For best performance, the
Charging Pin Connector must be clean and free
from dust and dirt. The life expectancy of the
battery will vary dependent on use.
USAGE - HANDHELD
The Handheld assembly uses the Motor Unit
and the
Floor Brush
(3)
.
To assemble, align the clip on the Floor Brush
(3)
with
the clip on the Handle and Motor Unit and push in
until it clicks audibly clicks into place.
To remove the Floor Brush
(3)
press the clip on the
Handle and Motor Unit to release.
5
Use only the attachments that
comes supplied with this appliance.
