USAGE - UPRIGHT
Use only the attachments that
comes supplied with this appliance.
USAGE - ATTACHMENTS
Use only the attachments that comes supplied with
this appliance.
To assemble, align the clip on either the Long Crevice
Tool
(12)
or Brush/Crevice Tool
(13)
on the Motor Unit
and push in until it audibly clicks into place.
To remove either attachment press the Clip on the
Handle and Motor Unit to release.
NOTE
The Vacuum Tube
(11)
may be used to
extend reach as required.
Use only the attachments that
comes supplied with this appliance.
The upright assembly uses the Vacuum Tube
(11)
, the
Motor Unit and the Floor Brush
(3)
.
Align the clip on the Vacuum Tube
(11)
with the
connection clip on the Motor Unit and push in until it
audibly clicks into place.
To attach the Floor Brush
(3)
, align the clip on the
Floor Brush with the Vacuum Tube connection clip
and push in until it audibly clicks into place.
To remove the Vacuum Tube
(11)
press the release
clip on the Handle and Motor Unit.
To remove the Floor Brush
(3)
press the release clip
on the Vacuum Tube
(11)
.
