VONETS
——
VM300-L/VM300-H Mini WiFi Module
3
Chapter 1 Repeater Mode Configuration
Instruction
1.1 Device Connection
Power on VM300-L/VM300-H by 5V/1A power supply, then connect to PC, there are two
connection ways as below:
A. Computer is wired connected to LAN port of VM300-L/VM300-H;
（
Recommend Method
）
B. The computer wirelessly connects to the WiFi signal of VM300-L/VM300-H, its
default hotspot parameters are as follows:
WiFi SSID
WiFi Password
VONETS_2.4G_****
12345678
(After the WiFi parameters are configured, the WiFi will be disconnected, that is normal.)
1.2 Repeater Application Configuration
The configuration steps of VM300-L/VM300-H for WiFi repeater and WiFi bridge are
basically the same, so this manual combines the configuration instructions of the two
application modes.
1. After computer is connected to VM300-L/VM300-H, open browser, input configured
