VONETS
——
VM300-L/VM300-H Mini WiFi Module
4
page: http://vonets.cfg (or IP: 192.168.254.254), then press Enter;
2. Input User name and Password in login page (both are
“
admin
”
), click
“
Login
”
button to enter configured page;
3.
“
Scan Hotspots
”
, choose the source hotspots, click
“
Next
”
;
4. Input
“
Source WiFi hotspot password
”
, click
“
Apply
”
;
IP layer transparent transmission
(factory default), transparent transmission of IP
layer data, can meet most of WiFi bridge applications;
MAC layer transparent transmission
, transparent transmission of all data above
the MAC layer (link layer) and MAC layer, including IP layer data. MAC transparent
transmission can solve some special applications for MAC layer encryption, such as
GoPro camera, Cisco AP, Hikvision monitoring system, etc;
The option
“
The configuration parameters of WiFi repeater security is
synchronized with source hotspot
”
is default ticked, it means the SSID of
VONETS repeater is associated with the SSID of the source hotspot, and the WiFi
password is the same as the password of the source hotspot;
Disable hotspot
, if you select
“
Disable hotspot
”
on the right side of the SSID, the
device will not transmit the corresponding hotspot and can only be used as a bridge
application;
Advanced Setting,
include Hot spot authentication match mode, WiFi Signal Motion
