Vonaq RapidTrace 1200, Руководство пользователя, Страница: 15 / 22

Single Shot Mode: Saves on battery life and also
enables the RapidTrace 1200 to be disconnected from
the cable while still leaving the fault display on the
screen
To enter “Continuous Scanning” mode press down and hold the
button.
The icon will appear at the bottom right of the display, when
continuous scanning mode is activated.
Continuous Scanning Mode: fires pulses into the
cable under test. In this mode the RapidTrace 1200 is
able to more easily identify intermittent cable faults.
4.4 Tone Generator
The may also be used as a tone generator to trace and
identify cables and wires. The user will need a conventional inductive
tone probe within the range 810 Hz to 1110Hz.
To select tone generator (Level 2)
From level 2 main menu using or to move to icon press select.
The tester is now in tone generator mode. Upon completion of testing
press to return to menu.
RapidTrace 1200
When tone has been selected, connect test lead to cable pair to be traced
and using tone probe which will emit a tone, the volume will increase the
nearer the probe is to the cable / being traced.
Note:- The auto off function is disabled in tone generator mode so that the
tone can be injected into a cable for extended periods while tracing takes
place.
15