communication
–
simple
–
flexible
–
unlimited
© Vonamic GmbH 2020
Subject to technical modifications
22
3.5.2
Set up an outgoing SIP connection
To configure an outgoing telephone connection (SIP), use the "
Key
Configuration
" area of the web
interface. Set the "
Telephone
Call
" function in the "
Call
Function
" drop-down menu. Enter the
telephone number of the SIP extension you want to reach in the "
Destination
" field. In order to be
able to actively end the connection, you need another button on which you configure the call function
"
Hangup
".
In our example, we configure an outgoing SIP call to an already registered SIP extension with the
telephone number
12344321
.
1.
In the "
Key
Configuration
" segment of the web interface, select the "
Call
Function
" function
"
Telephone
Call
" in the drop-down menu for key 3.
2.
Enter the number
12344321
in the "
Destination
" field of key 3. (25 Characters maximum.)
3.
Select the "
Call
Function
" "
Hangup
" in the dropdown menu for key 4.
4.
Save your entry with “
Submit
”.
By pressing key 3 on device
ID
1615
, a SIP call to the extension
12344321
is requested via the server
192.168.100.250
. If a corresponding SIP device is registered on the server, a connection to this
extension will be established. If no corresponding extension is registered, you will receive an acoustic
busy signal in the internal loudspeaker of the V615 Industrial Callstation.
If the connection has been successfully established and the extension has answered the call, activate
the microphone of the V615 by pressing and holding the connection key. If the connection is
terminated by the destination, you will receive an acoustic message in the V615 loudspeaker and the
connection will be terminated. You can actively end the call by executing the "
Hangup
" function on
key 4.
