Volvo TAD941GE, Руководство пользователя и инструкция по обслуживанию

Страница: 33 / 76

31
Maintenance
Engine oil, changing
WARNING! Hot oil and hot surfaces can cause
burns.
NOTE! Oil changes must be done when the engine is
warm.
1. Connect the drain hose to the oil drain pump and
check that no leakage can occur.
2. Pump the oil out (or remove the bottom drain plug
and drain the engine oil).
NOTE! Collect the old oil and oil filters, and hand
them to a re-cycling station for destruction.
3. Remove the drain hose (or install the bottom drain
plug).
4. Fill up with engine oil. Change volume, please re-
fer to the “Technical Data” chapter.
Oil level, checking and filling
The oil level must be inside the marked area on the
dipstick and must be checked daily before
the first start.
Top up with oil via the filler opening on the left side of
the engine.
Check that the correct level has been achieved. Wait
for a few minutes to allow the oil to run down into the
sump.
IMPORTANT! Do not fill up above the maximum
oillevel. Only use a recommended grade of oil.
(please refer to previous page).
NOTE! The oil level sensor only measures the oil lev-
el at the time when the ignition is turned on. In other
words, not continually during operation.