Volvo TAD941GE, Руководство пользователя и инструкция по обслуживанию

Страница: 22 / 76

Starting the engine
20
Volvo Penta starter switch
(standard pre-heating setting)
1. Turn the key to position “I” and check
the warning lamps
2. Position “ II ”. Pre-heating is activated (pre-heating
is optional). Wait until the pre-heating indication
lamp goes out. Pre-heating time depends on en-
gine temperature.
3. Start the engine in position “ III ”. Release the key
back to position “ I ” immediately after the engine
has started.
NOTE! The engine has a built-in starter interlock to
prevent involuntary engagement of the starter motor
when the engine is running. To do a new start attempt,
the key must first be turned back to position “
O ”.
Let the engine run at 500-700 rpm for the first 10 sec-
onds. Then warm the engine up at low speed and un-
der low load.
IMPORTANT! Never race the engine when it is
cold.
Alternative pre-heating:
(set by the supplier)
1. Turn the key to position “ I ” and check the indica-
tion lamps. Pre-heating is activated automatically
(pre-heating is optional). Pre-heating time depends
on engine temperature.
2. Start the engine in position “ III ”. Release the key
back to position “ I ” immediately after the engine
has started.