Volvo S60 Cross Country 2016, Руководство пользователя

Страница: 90 / 440

||
03 Instruments and controls
03
88
*
Option/accessory, for more information, see Introduction.
also activated automatically if the windscreen
wipers or rear fog lamps are activated.
With the knob in position dipped beam
is always switched on when the engine is run-
ning or when key position
II
is active.
Main beam flash
Move the stalk switch gently towards the
steering wheel to the position for main beam
flash. Main beam comes on until the stalk
switch is released.
Main beam
Main beam can be activated when the knob
is in position
19
or . Activate/deac-
tivate main beam by moving the stalk switch
towards the steering wheel to the end posi-
tion and then releasing. Alternatively, the
main beam can be deactivated by a light
press of the stalk switch toward the steering
wheel.
When main beam has been activated the
symbol illuminates in the combined
instrument panel.
Auxiliary lamps*
If the car has auxiliary lamps, the driver can
use the MY CAR menu system to choose
whether they should be deactivated or
switched on/off simultaneously with the main
beam
20
, see MY CAR (p. 108).
Related information
•
Active Xenon headlamps* (p. 91)
•
Active main beam* (p. 88)
•
Light switches (p. 84)
•
Headlamps - adjusting headlamp pattern
(p. 96)
•
Tunnel detection* (p. 87)
Active main beam*
Active main beam function is available with
on/off functionality, or adaptive functionality,
depending on headlamp variant. The function
detects the headlamp beams from oncoming
traffic or the rear lights of vehicles in front,
and switches the lighting from main beam to
dipped beam. Active main beam with adap-
tive functionality only dims the part of the light
beam that points directly to the vehicle. The
lighting returns to main beam when the
incoming light has stopped.
Active main beam - AHB
Active main beam (Active High Beam - AHB)
is a function which uses a camera sensor at
the top edge of the windscreen to detect the
headlamp beams from oncoming traffic or the
rear lights of vehicles in front, and then
switches from main beam to dipped beam.
The function can also take streetlights into
account.
Car with halogen headlamps
The lighting returns to main beam about a
second after the camera sensor no longer
detects the headlamp beams from oncoming
traffic or the rear lights from vehicles in front.
Car with active Xenon headlamps
If the active main beam has the on/off func-
tionality then the lighting returns to main
19 When dipped beam is switched on.
20 Auxiliary lamps must be connected to the electrical system by a workshop. Volvo recommends that you contact an authorised Volvo workshop.