Volvo S60 Cross Country 2016, Руководство пользователя

Страница: 91 / 440

03 Instruments and controls
03
}}
89
beam about a second after the camera sen-
sor no longer detects the headlamp beams
from oncoming traffic the rear lights of vehi-
cles in front.
If the active main beam has adaptive func-
tionality then, unlike what happens during
conventional dimming, the light beam contin-
ues to illuminate with main beam on both
sides of oncoming traffic or vehicles ahead -
only the part of the light beam that points
directly to the vehicle is dimmed.
Adaptive functionality: Dipped beam directly
toward oncoming vehicles, but continued main
beam on both sides of the vehicle.
The lighting returns to full main beam about a
second after the camera sensor no longer
detects the headlamp beams from oncoming
traffic or the rear lights from vehicles in front.
Activating/deactivating
AHB can be activated when the headlamp
control's knob is in position
(provided
that the function has not been deactivated in
the menu system MY CAR, see MY CAR
(p. 108)).
Stalk switch and knob for headlamp control in
AUTO position.
The function can start while driving in the
dark when the car's speed is 20 km/h or
higher.
Activate/deactivate AHB by moving the left-
hand stalk switch towards the steering wheel
to the end position and then releasing. Deac-
tivation when main beam is on means that the
lights are reset directly to dipped beam.
Car with analogue combined instrument
panel
When AHB is activated the symbol illu-
minates in the instrument's information dis-
play.
When main beam is switched on the
symbol also illuminates in the combined
instrument panel. This also applies for active
Xenon headlamps if the main beam is partially
dimmed, i.e. as soon as the light beam shines
with slightly more than dipped beam.
Car with digital combined instrument panel
When AHB is activated the symbol
turns white in the instrument's information
display.
When main beam is activated, the symbol
turns blue. This also applies for active Xenon
headlamps if the main beam is partially
dimmed, i.e. as soon as the light beam shines
with slightly more than dipped beam.