Service mode
The information panel has a function called Service mode. With
active Service mode it is possible to access additional or alterna‐
tive information, e.g., numerical values instead of bars and part
numbers for software. Service mode also has additional func‐
tions, e.g., simultaneous acknowledgement of all alarms.
The following conditions must be fulfilled to activate Service
mode:
- engine off
- Parking brake applied
- Service key pressed in for more than 3 seconds
- Approved message “Enter Service mode” with SELECT-key
within 10 seconds.
When Service mode is active the symbol is shown in the lower
field in the operating display. To leave Service mode, press in the
Service-key for at least 3 seconds.
The functions for Service mode are described further under each
group.
Warnings and alarms
Warnings and alarms from the machine are obtained through a
combination of central warning, buzzer, and messages in the
information panel. For further information about central warning,
see
Messages about alarms in the information panel are either
instructional or informative. In case of serious malfunction, both
instructional and informative messages are obtained as follows:
- First the instructional message is obtained, e.g. Stop vehicle or
Turn Off Engine.
- After the instruction has been performed, the informative mes‐
sage is obtained, e.g. Low oil level engine.
WARNING!
Do not ignore the alarm and continue to operate the machine!
Safely shut down the machine. Inspect and repair the fault. Fail‐
ure to comply could result in injury!
For further information about alarms, see
57.
40
