Intermittent wiper and washer
Regarding: L60F, L70F, L90F
The interval for the front wiper can be set with the aid of SW3602
as follows:
If SW3602 is set in position On, then Off and then again in position
On after X seconds, the time between the wiping actions will be
X seconds.
NOTE! The time between wiping actions cannot be shorter than
5 seconds or longer than 25 seconds. If an attempt is made at
setting the time between wiping actions to more than 60 seconds,
no new time will be set and instead the previous time interval will
continue to apply.
Intermittent wiper and front washer
Input signals
Conditions for output functions
Output functions
- Intermittent wiper
front, SW3602
- Washer front,
SW3608
- Intermittent wiper front On
- Intermittent wiper front
active On for 0.5 second and
then Off for X seconds
(a)
The sequence will be
repeated until Intermittent
wiper front is Off
- Intermittent wiper front Off
- Washer front Off
- Intermittent wiper front
active Off
- Washer front On
- Intermittent wiper front
active On after 1 second.
- Washer front
- Washer front Off
- Intermittent wiper front
active Off after 5 seconds.
a) If no interval has been set with SW3602, X = 7 seconds.
The following applies in case of faulty input signals:
Input signal
Assumed value in case of a fault
Intermittent wiper front, SW3602
Off
Washer front, SW3608
Off
30
