Volvo C30 - ANNEXE 798, Руководство по эксплуатации

Страница: 36 / 88

02 Easy user mode
Setting a destination
02
36
Selecting an address
Set destination Address
Selecting a street address
The system will place the cursor on Street. The
most recently selected State and City will be
pre-selected.
1. To change the state or city, use the
navigation control to move to State and/
or City .
2.
Press ENTER , or choose among the most
recently chosen alternatives with .
NOTE
The definition of a city or area may vary. It
will sometimes be an entire city, or a partic-
ular section of a city.
The system does not contain street
addresses for very small towns or villages.
In these cases, the center of the town is
used as the destination.
Alternative 1
•
Select
Street
without choosing a city.
The system will provide guidance to the mid-
point of the selected street. If the street exists
in more than one city, a list of alternatives will
be displayed.
Alternative 2
1. Begin by selecting a City .
2.
Select a Street .
Selecting a street number
If the address selected has a street number,
this can be used as a specific destination.
1. After selecting a street, go to the
Number row and press ENTER
or
Go directly to Set . Alternative street num-
bers will be displayed.
2.
Go to
Set
after you have entered a street
number.
If a street number has not been entered,
the system will guide you to the mid-point
of the selected street.
Set
Confirms the entered number.
Undo
Returns to the previous screen.
Selecting an intersection
•
Go to
Interse.
and choose a street that
intersects the selected street.
Start guidance
•
Go to
Start guidance
to begin receiving
directions to the destination.