66A
IMG-273826
66B
IMG-273863
Note!
The adapter cable A was included in a previous version of the
kit for the parking camera.
The adapter cable B was included in a later version of the kit
for the parking camera.
Both versions are suitable for all cars.
Figure A shows adapter cable A
Figure B shows adapter cable B
Connect the previously routed cable harness connector to the
right-hand connector on the control module (1).
Take the adapter cable A/B from the kit and connect the large
green connector to the socket on the control module, as
illustrated.
Connect the connector (2) on the pre-routed cable harness for
the power supply to the corresponding contact on the adapter
cable.
Take the long remaining cable harness from the kit and connect
the end with the gray connector (3) to the connector in the
middle of the control module.
67
IMG-273864
Press the control module firmly onto the existing Velcro straps
under the tail lamp.
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation
Parking assistance, camera, rear- 31428063 - V1.0
Page 38 / 57