
36
IMG-255734
Drill out the holes in the protruding lugs using a
Ø2.5 mm (3/32
")
drill bit.
Remove any swarf.
37
IMG-255735
Take two screws and the camera with the seal from the kit.
Screw the screws into the holes on the camera completely so
that they rotate freely.
Insert the camera into the hole and screw it into place by
tightening the screws crosswise so that the camera is tightened
parallel to the panel.
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation
Parking assistance, camera, rear- 31428063 - V1.0
Page 22 / 57