Volvo 2012 XC60, Руководство пользователя

Страница: 174 / 374

04 Comfort and driving pleasure
Collision warning with Full Auto-brake and Pedestrian Detection*
04
174 *
Option/accessory, for more information, see Introduction.
Operation
Settings are made by pressing MY CAR on the
center console control panel and using the
menus displayed.
On and off
To switch Collision Warning on or off, press MY
CAR on the center console control panel and
go to Settings Car settings Driver
support systems Collision Warning . If
Collision Warning is on, the system will perform
a self-test each time the engine is started by
briefly illuminating the warning light. See page
134 for more information about the menu sys-
tem.
When the engine is switched on, the Collision
Warning setting that was being used when it
was switched off will be the default setting.
Activating/deactivating warning signals
The collision warning system’s visual signals
are activated automatically when the engine is
started if the collision warning system is
switched on.
The audible warning signal can be activated/
deactivated by pressing
MY CAR on the center
console control panel and going to Settings
Car settings Driver support systems
Warning sound if risk of collision .
Setting a warning distance
This setting determines the distance at which
the visual and audible warnings are triggered.
Select
Long , Normal or Short by pressing MY
CAR on the center console control panel and
going to Settings Car settings Driver
support systems Collision Warning
Warning distance .
The warning distance determines the level of
sensitivity used by the system. The warning
distance
Long
provides an earlier warning.
Begin by using Long and if the system gives
too many warnings, try changing to Normal .
WARNING
•
The setting
Short
should only be used
in situations where traffic is light and
moving at low speeds.
•
Collision Warning alerts the driver to the
risk of a collision but this function can-
not reduce the driver’s reaction time.
•
For Collision Warning to be as effective
as possible, it is recommended that Dis-
tance Alert be set to 4 or 5, see
page 164.
NOTE
•
When Adaptive Cruise Control is used,
the warning light and signal will be used
by that function, even if the warnings
provided by Collision Warning have
been deactivated by the driver.
•
In situations where traffic is moving at
considerably different speeds, or if the
vehicle ahead brakes suddenly, warn-
ings may be considered to be late, even
if the setting
Long
has been selected.
Checking settings
The current Collision Warning settings can be
checked by pressing
MY CAR on the center
console control panel and going to Settings
Car settings Driver support systems
Collision Warning .
Limitations
Strong sunlight, reflections, extreme light con-
trasts, the use of sunglasses, or if the driver is
not looking straight ahead may make the visual
warning signal in the windshield difficult to see.
For this reason, always activate the audible
warning signal.
Slippery driving conditions increase braking
distance, which can reduce the system's