Volvo Penta V6-240, Руководство оператора

Страница: 69 / 176

Starting Using the Key
1 Move the control handle to the NEUTRAL position
N .
2 Turn the ignition switch to START S and hold, for
no longer than ten seconds or until engine starts. If
the engine does not start, let go momentarily, then
try again.
3 As soon as engine starts, release key to I (On/Run).
NOTICE! Never turn the key to S (Start) when the
engine is running. Start damage is possible.
NOTICE! Risk of starter damage, do not run the starter
for extended periods (>20 sec.). Allow time to cool
between start attempts.
If the engine floods during a warm start, see
Starting page 69 .
Starting Using the e-Key
The ignition is activated when the system is unlocked.
The LED on the Ignition button
I turns on when the
ignition is activated.
Pressing the
Ignition button I turns the ignition on or
off.
With the ignition on, press the
Start/Stop button S to
start the engine.
The Led on
Start/Stop turns on when the engine is
running.
Press the
Start/Stop button again to stop the engine.
Pass the key over the sensor to lock the EVC system.
NOTICE! If the system is not locked the engine(s) can
be started by pressing the buttons on the panel. To
secure the boat the system must be locked, with the
key, before leaving the boat.
NOTICE! A technician MUST have one of the e-Keys
to perform most service work on the driveline. Make
arrangements to leave an e-Key with the dealer when
scheduling work.
P0018475
P0016544
P0016537
Starting
47706354 08-2015 © AB VOLVO PENTA 67