manualshive.com logo in svg

Volvo Penta V6-240, Руководство оператора

Поделиться
Скачать
Volvo Penta V6-240 Скачать руководство пользователя страница 64

Active Corrosion Protection
System

Your boat may be equipped with a Volvo Penta active
corrosion protection system (ACPS).

The ACPS acts as an active anode and is designed to
reduce the galvanic corrosion of underwater parts of
the drive. The system works in conjunction with the
drive’s sacrificial anodes. The sacrificial anodes may
last much longer with ACPS, however they must still
be checked periodically, see 

Maintenance

Schedule page 128

.

NOTICE!

 The active corrosion protection system is

designed to adequately protect one drive unit from gal-
vanic corrosion under normal operating conditions.
This system will not provide protection from stray cur-
rents emitted by a malfunctioning AC power source on
your boat, the pier, or other boats in close proximity to
yours.

NOTICE!

 ACPS is designed for salt water applications

only; using the system in fresh water–while harmless–
will not protect your drive from corrosion.

The ACPS control module will be mounted near the
rear of the engine.

The module has green 

G

 and red 

R

 LED indicator

lights. The lights indicate the status of the system:

1 Green LED only indicates the system is working.

2 Green and red LEDs on, the system is working,

however the system is drawing power.

3 Red LED only, the system has power but is not

working (no protection).

4 No LEDS, the system does not have power, and is

not working (no protection).

If conditions 2, 3, or 4 exist, see 

Active Corrosion Pro-

tection System page 124

 in 

Troubleshooting

.

If your drive is not equipped with ACPS, the system
can be purchased from your authorized Volvo Penta
dealer.

P0018276

 

Optional

62

47706354 08-2015  © AB VOLVO PENTA

Содержание V6-240

















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды