Volvo Penta V6-240 Скачать руководство пользователя страница 20

Страница: 20 / 176

Ignition switch

Usually located at the helm, near the gauges.

Key positions control power to accessories, power to
the electrical system, and starting the engine;

Power is provided to run accessories.
Ignition is OFF and engine is OFF.
Not present on all ignition switches.

Off position, the key can be inserted or removed.

Ignition is ON and engine is OFF. System energized.

START position (momentary). The starter motor is
engaged and starting the engine.
See

Starting page 64

Volvo Penta ignition keys are marked with a code for
use when ordering extra keys. Record the code so that
replacement keys can be ordered.

Start/Stop Panel

The start/stop panel is situated on stations other than
the main station.

NOTICE!

Please refer to the chapters entitled

Start-

ing

and

Operation

before attempting to start the

engines.

The ignition key(s) on the main station must be in the
ON or RUN position to be able to start the engines with
the start buttons on the start/stop panel. The engines
can only be started and stopped if no other station is
locked.

Always push the buttons firmly for at least one second.

P0016523

Instruments and Controls

47706354 08-2015 © AB VOLVO PENTA

Содержание V6-240

















































































































































































Результаты поиска

Содержание V6-240

Отзывы:

Бренды по названию

Популярные бренды

Volvo Penta V6-240, Руководство оператора

Результаты поиска

Содержание V6-240

Отзывы:

Бренды по названию

Популярные бренды