Volvo Penta TAD734GE, Руководство по установке

Страница: 40 / 48

Fault codes
Code 6.1, PID / SPN 110. Coolant temperature
Reason:
• Coolant temperature is too high.
Reaction:
• Engine control module reduces engine power (un-
less the protection has been shut off with the
VODIA diagnostic tool).
Action:
• Check the coolant level.
• Check the charge air cooler (cleanliness).
• Check if there is air in the cooling system.
• Check the pressure cap on the expansion tank.
• Check coolant temperature sensor function.
• Check thermostat function.
Code 6.2, PID / SPN 105. Charge air temperature
Reason:
• The charge air temperature is too high.
Reaction:
• Engine control module reduces engine power (un-
less the protection has been shut off with the
VODIA diagnostic tool).
Remedy:
• Check coolant level.
• Check the charge air cooler (cleanliness).
• Check charge air temperature sensor function.
• Check thermostat function.
Code 6.4, SID 231 / SPN 639. Data link (CAN), CIU
Reason:
• Faulty data link (CAN), CIU.
Reaction:
• Instruments and warning lamps stop working.
Action:
• Check that the 8-pin connector is not damaged.
• Check that the cables between the CIU and the
engine management unit are not damaged.
Code 6.5, SID 231 / SPN 639/2017 / PSID 201
Data link (CAN), EMS 2
Reason:
• Internal fault in control module.
Reaction:
• Engine not operating: engine cannot be started.
Engine running: engine idles and can only be
stopped with the emergency stop (AUX-stop).
Action:
• Check that the 8-pin connector is not damaged.
• Check that the cables between the CIU and the
engine management unit are not damaged.
• Check that sockets 11 and 12 in the connector on
the CIU are not damaged.
Code 6.6, PID / SPN 100. Oil pressure
Reason:
• Oil pressure is too low.
Reaction:
• Engine control module reduces engine power (un-
less the protection has been shut off with the
VODIA diagnostic tool).
Action:
• Check oil level.
• Check that the air filters are not blocked.
• Check system pressure valves and safety valves
in the oil system.
• Check oil pressure sensor function.
Code 6.9, PID / SPN 158
Battery voltage, CIU
Reason:
• Short circuit to negative (-).
• Faulty alternator.
• Faulty battery, battery cables.
Reaction:
• Problems in engine starting.
Action:
• Check the supply voltage from the control unit.
• Check the battery.
• Check the alternator.
• Check the 8-pin connector.